Cleaning Function; Childproofing Feature - bora PKT11 Operating And Installation Instructions

Switching on the bridging function
Both control knobs are set to the 12 o'clock position.
Press the touch-operated area of both control knobs at
X X
the same time for at least 1 second.
appears on the left control knob and
%
Q Q
one.
Turn the selector ring on the right-hand control knob to
X X
the desired power level within 3 seconds.
The power level (for both grilling zones) appears on the
Q Q
right-hand control knob's display.
The right-hand control knob can now be used to adjust
Q Q
the power levels for both grilling zones.
If the right-hand selector ring is not turned to a power
Q Q
level within 3 seconds of activating the bridging
function, this function is disabled and the cooktop
switched off.
Switching off the bridging function
Turn the right-hand control knob to the 12 o'clock
X X
position.
The bridging function and cooktop are switched off.
Q Q

6.3.4 Cleaning function

INFO The selector ring position for the cleaning function
is between the 12 o'clock and 1 o'clock positions
(see low power levels).
Turn the selector rings on both control knobs
X X
approximately 15° clockwise from the 12 o'clock
position until they engage.
appears on the control knob displays.
c
Q Q
The crescent-shaped grilling zone indicators flash while
Q Q
the zones are heating up or cooling down.
Wait until the grilling zone indicators have stopped
X X
flashing.
Once the optimum cleaning temperature of 70°C has
Q Q
been reached, the grilling zone indicators stop flashing.
Clean the Tepan stainless steel grill as described in the
X X
Cleaning and maintenance section.
INFO The cleaning function must be activated for both
grilling zones to prevent the risk of burns.
INFO Only start cleaning the grilling zones once the
optimum cleaning temperature has been reached
(see also the Cleaning section).
Switching off cleaning function
Turn both control knobs to the 12 o'clock position.
X X
The cleaning function and the cooktop are
Q Q
switched off.
www.bora.com

6.3.5 Childproofing feature

INFO The childproofing feature can only be activated
on the right
0
Activating the childproofing feature
Press the touch-operated area on a control knob for
X X
5 seconds.
An acoustic signal sounds and
Q Q
knob display. The display goes blank after 10 seconds
and the childproofing feature is activated.
Permanently deactivating the childproofing
feature
Press the touch-operated area on a control knob for
X X
5 seconds.
An acoustic signal sounds and
Q Q
knob display. The display goes blank after
10 seconds and the childproofing feature is
permanently deactivated..
Deactivating the childproofing feature for a
cooking session
Turn the selector ring from the 12 o'clock position to a
X X
power level.
appears on the control knob display.
Q Q L
Press the touch-operated area on a control knob for
X X
5 seconds.
An acoustic signal sounds and the selected power level
Q Q
appears on the control knob display.
The childproofing feature is now deactivated for this
Q Q
cooking session and the desired power level can be
set.
The childproofing feature is activated again the next
Q Q
time the cooktop is switched on.
INFO If the cooktop is switched off at the end of the
or permanently deactivated if both knob brings
are at the 12 o'clock position and no function is
active.
L
0
cooking session (turn the selector ring to the
12 o'clock position), the childproofing feature is
automatically re-activated.
Operation
EN
appears on the control
appears on the control
25