To Be Taken Into Account During Automatic Operation; Intended Use - Dentsply Sirona inEos X5 Operating Instructions Manual

3 Safety

3.3 To be taken into account during automatic operation

12
To be taken into account during automatic
3.3
operation
CAUTION
Risk of injury! / collision hazard!
During automatic operation there is a risk of injury/collision hazard as
a result of the swiveling movement of the articulated arm.
➢ Ensure that there are no objects and/or body parts on the work
plate (shaded area) during automatic operation.

Intended use

3.4
This system is used for 3D digitization of single tooth or complete jaw
models and impressions.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
Dentsply Sirona
Operating Instructions inEos X5
64 17 096 D3586
D3586.201.01.11.02 07.2018