Checking Gps Connections; Changing The Gps Time - Standard Horizon QUANTUM GX2360S Owner's Manual

4.5 CHECKING GPS CONNECTIONS

After connections have been made between the QUANTUM and the GPS, a
small satellite icon will appear on the top right corner of the LCD display. To see
additional GPS information press and hold the [ H/L ( NAV )] key until the
QUANTUM shows the Date, Time, SOG and COG.

4.6 CHANGING THE GPS TIME

From the Factory the QUANTUM shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the [ CALL/SET ( MENU )] key until "RADIO SETUP"
menu appears.
2. Press the [ CALL/SET ( MENU )] key, then select
"TIME SET" with the CHANNEL selector knob.
3. Press the [ CALL/SET ( MENU )] key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If "0:00" is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ CALL/SET ( MENU )] key to store the time
offset.
6. Press the [ 16/9 ] key or turn the CHANNEL selector knob to select "EXIT,"
then press the [ CALL/SET ( MENU )] key to return to the "RADIO SETUP"
menu, select "EXIT" and press the [ CALL/SET ( MENU )] key to return to
radio operation.
Page 14
O T T
GX2360S