Standard Horizon QUANTUM GX2360S Owner's Manual page 33

6.22.1 Communication
1. Press and hold the [ DW ( IC )] key while in the "RA-
DIO" mode, the mode is changed to "INTERCOM"
mode.
2. If your QUANTUM is equipped two RAM+ Mic's, se-
lect the companion you wish to communicate (RAM1,
RAM2, or ALL) with the CHANNEL selector knob,
then press the [ CALL/SET ( MENU )] key.
2. When the "INTERCOM" operation is
activated, "INTERCOM" is displayed
on the QUANTUM, and "IC" is dis-
played on the RAM+ Mic.
3. Press the PTT switch. "TALK" will be
shown on the display.
NOTE: A warning beep will be emit-
t e d w h e n
microphone's PTT switch is pressed
while the RAM+ Mic's PTT switch is pressed.
4. Speak slowly and clearly into the microphone, hold the microphone about
1/2 inch away from your mouth.
5. When finished, release the PTT switch.
6. Press and hold the [ DW ( IC )] key again the mode will revert to "RADIO"
mode.
6.22.2 Calling
Hold down the [ DW ( IC )] key for 1 second or more, when the "INTERCOM"
operation is activated. A calling beep is emitted twice from the transceiver
speaker.
When both RAM+ microphones are intercom
mode, the QUANTUM will be temporarily disabled
until the RAM+(s) exit the RAM+ to RAM+ inter-
com mode.
GX2360S
t h e Q U A N T U M
NOTE
( QUANTUM's PTT switch is pressed )
( RAM+ Mic's PTT switch is pressed )
Page 33