True Magnetic Change (Nav Display); Fog Alert Tone Frequency - Standard Horizon QUANTUM GX2360S Owner's Manual

8.8 TRUE MAGNETIC CHANGE ( NAV display )
Allows customizing the GPS COG (Course Over Ground) displayed on the LCD
to be in True or Magnetic.
1. Press and hold down the [ CALL/SET ( MENU )] key
until "RADIO SETUP" menu appear.
2. Press the [ CALL/SET ( MENU )] key, then select
"TRUE MAG" in the "RADIO SETUP" menu with the
CHANNEL selector knob.
3. Press the [ CALL/SET ( MENU )] key.
4. Turn the CHANNEL selector knob to select "MAG-
NETIC" or "TRUE."
5. Press the [ CALL/SET ( MENU )] key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.

8.9 FOG ALERT TONE FREQUENCY

This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are "250 Hz" through "850 Hz" in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [ CALL/SET ( MENU )] key
until "RADIO SETUP" menu appear.
2. Press the [ CALL/SET ( MENU )] key, then select
"FOG FREQ." in the "RADIO SETUP" menu with
the CHANNEL selector knob.
3. Press the [ CALL/SET ( MENU )] key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the [ CALL/SET ( MENU )] key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
GX2360S Page 55