Changing Cog To True Or Magnetic - Standard Horizon QUANTUM GX2360S Owner's Manual

4.7 CHANGING COG TO TRUE OR MAGNETIC

Allows customizing the NAV data showing GPS Course Over Ground (COG).
Factory default is True however following the steps below the COG can be
changed to Magnetic.
1. Press and hold down the [ CALL/SET ( MENU )] key
until "RADIO SETUP" menu appears.
2. Press the [ CALL/SET ( MENU )] key, then select
"TRUE MAG" in the "RADIO SETUP" menu with the
CHANNEL selector knob.
3. Press the [ CALL/SET ( MENU )] key.
4. Turn the CHANNEL selector knob to select "MAG-
NETIC" or "TRUE."
5. Press the [ CALL/SET ( MENU )] key to store the se-
lected setting.
6. Turn the CHANNEL selector knob to select "EXIT,"
then press the [ CALL/SET ( MENU )] key to return to the "RADIO SETUP"
menu, select "EXIT" and press the [ CALL/SET ( MENU )] key to return to
radio operation.
GX2360S Page 15