Connection Of Gps With Nmea Output - Standard Horizon QUANTUM GX2360S Owner's Manual

4.4 CONNECTION OF GPS WITH NMEA OUTPUT

STANDARD HORIZON
Furuno GP30, 36
Furuno GP1650, 1850
Garmin Fixed Mounts
Garmin Portables
JRC GPS500
JRC 100 SERIES
JRC 200 SERIES
Lowrance Fixed Mount
Additional Information:
• The GPS must have the NMEA Output turned on and set to 4800 Baud in
the setup menu. If there is a selection for parity select none.
• For further information on interfacing /setting up your GPS. Please contact
the manufacturer of the GPS receiver.
• QUANTUM can read NMEA-0183 version 2.0 or higher.
• The NMEA supported sentences are:
Input: GLL, GGA, RMC and GNS (RMC sentence is recommended)
Output: DSC and DSE
(DSC sentences to Standard Horizon Plotter for Position Polling)
If you have further inquires, please feel free to contact Product Support at:
Phone: (800) 767-2450
Email: marinetech@vxstdusa.com
GX2360S
Green Green
Blue Gray
Brown Blue
White Blue
Blue Green
White Blue
Black Green
Blue Blue
Black (GND) Green
Brown Blue
Black (GND) Green
Yellow Blue
Green Green
Green Blue
Black Green
White Blue
Black Green
White Blue
Black (GND) Green
Lowrance Portable
Magellan Fixed Mount
Magellan Portable
Northstar
Raytheon 420
Raytheon 520 / 620
Raytheon RL SERIES
Simrad
Sitex Neptune, Nautilus
Orange Blue
Black (GND) Green
Gray Blue
Black (GND) Green
Orange Blue
Black (GND) Green
Yellow Blue
Black (GND) Green
Yellow Blue
Brown Green
Blue Blue
Brown Green
White Blue
Brown Green
White Blue
Brown Green
Gray Blue
Brown Green
Page 13