Channel A/B Preset Channels - Standard Horizon QUANTUM GX2360S Owner's Manual

6.17 CHANNEL A /B PRESET CHANNELS
Two calling channels (used by an organization or a favorite channel) can be
preset. But USA channels 9 and 16, and WX channels should not be assigned
as A or B channels because they are readily available with the [ 16/9 ] and [ WX ]
keys.
6.17.1 Storing a new A/B channel
1. Press and hold down the [ A/B ] key and rotate the CHANNEL Selector knob
to select the desired channel.
2. Release the [ A/B ] key to store a desired channel as channel A/B.
3. Repeat steps to program second channel A/B.
6.17.2 Changing the stored A/B channel
1. Press the [ A/B ] key for memorized channel to appear.
2. Press and hold down the [ A/B ] key and rotate the Channel Selector knob to
select the desired channel.
3. Release the [ A/B ] key to store a desired channel as channel A/B.
The A/B channels can be cleared by following the microprocessor reset
procedure (see section 6.23)
6.17.3 Operating the channel A/B
Pressing the [ A/B ] key more than once toggles between
channel A, channel B and the channel that was received
on.
GX2360S
NOTE
Page 29