Accessory Cable - Standard Horizon QUANTUM GX2360S Owner's Manual

2. Connect the red power wire to a 13.8 VDC ±20% power source. Connect
the black power wire to a negative ground.
3. If an optional remote extension speaker is to be used, refer to section 3.3
for connections.
4. It is advisable to have a Certified Marine Technician check the power output
and the standing wave ratio of the antenna after installation.

4.3 ACCESSORY CABLE

White: External speaker (+)
Shield: External speaker (–)
Red: PA speaker (+)
Shield: PA speaker (–)
Blue: NMEA IN (+) from GPS navigation receiver
Green: NMEA IN (–) from GPS navigation receiver
Gray: NMEA OUT (+) to GPS navigation receiver
Brown: Test port (for the Service Technician)
When connecting the external speaker or GPS navigation receiver, strip off
about 1 inch (2.5 cm) of the specified wire's insulation, then splice the ends
together.
Wire Color/Description
WHITE - External Speaker ( + )
SHIELD - External Speaker (–)
RED - PA Speaker ( + )
SHIELD - PA Speaker (–)
GREEN - NMEA Ground
BLUE- NMEA Input (+)
GRAY-NMEA Output (+)
Page 12
16/9
WX
A/B
QUANTUM GX2360S
IC
PA/
DW SCAN
FOG
NAV MENU
CALL
H/L MEM
SET
Shield
Red
VOL/PWR
Gray
Green
Blue
Shield
SQL
White
DISTRESS
PULL OPEN
Connection Examples
Connect to external 4 Ohm audio speaker
Connect to external 4 Ohm audio speaker
Connect to external 4 Ohm PA speaker
Connect to external 4 Ohm PA speaker
Connect to NMEA (–) connection of GPS
Connect to NMEA ( + ) output of GPS
Connect to NMEA ( + ) input of GPS
PA Speaker
Blue
Green
Brown
External Speaker
GX2360S