Time Offset - Standard Horizon QUANTUM GX2360S Owner's Manual

8.3 TIME OFFSET

Sets the time offset between local time and UTC (time GPS sends to radio).
Time is displayed when GPS position (LAT/LON) is displayed by pressing the
[ H/L ( NAV )] key.
1. Press and hold down the [ CALL/SET ( MENU )] key
until "RADIO SETUP" menu appears.
2. Press the [ CALL/SET ( MENU )] key, then select
"TIME SET" in the "RADIO SETUP" menu with the
CHANNEL selector knob.
3. Press the [ CALL/SET ( MENU )] key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If "0:00" is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ CALL/SET ( MENU )] key to store the time offset.
6. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
GX2360S
O T T
Page 51