Disassembly Of The Clutch, Primary And Balance Drive; Overview Of Clutch Components - Rotax 125 MAX DD2 Repair Manual

Repair Manual 125 MAX DD2

Disassembly of the clutch, primary and balance drive

Overview of clutch components

Fig. 26
➩ Free the gearbox casing cover (Clutch cover, Item 1) with 6 screws (Item 16), bracket (Item 3)
with 4 screws (Item 15) and remove gasket (Item 2).
➩ Remove the secondary gear wheel (Item 4) from the pinion shaft.
➩ Remove the shaft circlips (Item 11) with a suitable pair of pliers.
➩ Remove the clutch drum with drive gear (Item 5) from the crankshaft.
➩ Remove the needle bearing (Item 6) from the crankshaft.
➩ Remove the thrust washer (Item 7) from the crankshaft.
Page 22 Issue 01/2006