Rotax 125 MAX DD2 Repair Manual page 23

➩ Secure the locking device (A) on the starter
toothed ring with a fixing bolt.
◆ Note:
Use the special tool - "Locking
device, complete" - ROTAX part no.
676 200 or 676 202.
➩ Unscrew the M22x1.5 hexagon nut of the
centrifugal clutch attachment (Item 8).
➩ Remove the disc spring (Item 9).
◆ Note:
The assembly and disassembly of
the clutch drum are described from
page 36.
➩ Pull the starter toothed ring (Item 10) from the crankshaft.
➩ Pull the starter drive, Fig. 28 (Item 1) and
adjusting washer (Item 2) from the gearbox
casing (Item 3).
◆ Note:
All item numbers on this page relate
to Fig. 26.
➩ Remove the balance drive gear wheel (Item 14)
from the crankshaft.
➩ Remove the second shaft circlip (Item.11) from
the pinion shaft.
➩ Remove the balance gear wheel (Item 13) with
needle bearing (Item 12) from the pinion shaft.
➩ Remove the third shaft circlip (Item 11) from the
pinion shaft.
Page 23
Repair Manual 125 MAX DD2
A
Fig. 27
Fig. 28
Fig. 29
Issue 01/2006