Installation Of The Radiator Hoses - Rotax 125 MAX DD2 Repair Manual

Installation of the radiator hoses

➩ First connect the radiator hose to the connection
support on the cylinder head cover. Then tighten
the clamp to provide water tightness with the
recessed head screw, as shown in Fig. 106.
◆ Note:
Install the profile hose untwisted.
➩ Attach the radiator hose to the water pump using
the hose clamp shown in Fig. 107 and tighten to
provide water tightness.
➩ Collect any overflowing coolant in a suitable
vessel.
➩ Using a funnel fill radiator with the prescribed
quantity of coolant via the filler opening.
✔ Check the sealing of the cooling system with
the engine running and warmed up.
Page 60
Repair Manual 125 MAX DD2
Fig. 106
Fig. 107
Issue 01/2006