Table of Contents
Advertisement
ASSEMBLY
TOOLS
13-15mm Wrench
1 PC
5mm Allen Wrench
With Phillips Screwdriver
1 PC
STEP 4
TIP: Refer to the Adjustments Pages 19-20 for more information on adjustments.
4A. Installing the Rear Support Tube to the Seat Post: Attach the Rear Support Tube (15)
onto the Seat Post (5) and choose two of the four holes on the Seat Post (5) to secure with using
two Carriage Bolts (106), two Flat Washers (33), two Nylon Nuts (34), and to secure the Rear
Support Tube (15) in place. Simultaneously tighten the Nylon Nuts (34) with the 13-15mm
Wrench.
4B. Installing the Backrest onto the Backrest Frame: Attach the Backrest (49) onto the
Backrest Frame (9) with four Hexagon Socket Bolts (101), four Spring Washers (102), and four
Flat Washers (33). Tighten the bolts with the 5mm Allen Wrench with Phillips Screwdriver
provided.
HARDWARE PACK
(102) Spring Washer
(33) Flat Washer
(101) Carriage Bolt
4 PCS
6 PCS
4 PCS
(34) Nylon Nut
(106) Carriage Bolt
2 PCS
2PCS
14
Hide quick links:
Advertisement
Table of Contents
