Seat Post: - Exerpeutic Folding Upright Bike with Pulse Owner's Manual

Step 3
Tip: The Seat Cushion (6) has 2 sets of adjustment holes. It is recommended that users between
5'1" – 5'6" use the holes towards the rear. It is recommended that users between 5'7" to 6'3" use
the holes towards the front.
3A Installing the Seat Cushion to the Seat Post: Align the bolt holes on the underside of the
Seat Cushion (6) with the holes on top of the Seat Post (5). Then attach the Seat Cushion (6) to
the Seat Post (5) with three Flat Washers (33) and three Hexagon Socket Bolts (58). Tighten the
Bolts (58) with the 5mm Allen Wrench with Philips Screwdriver provided.
3B Installing the Seat Post to the Rear Frame: Insert the Seat Post (5) into the Rear Frame (2)
and stop at your desired seat height. Install the Seat Height Adjustment Knob (14) into the
threaded hole on the right side of the Rear Frame (2) by turning it CLOCKWISE, making sure that
the safety pin of the Seat Height Adjustment Knob (14) catches one of the height adjustment
holes of the Seat Post (5).
(14) Seat Height
Adjustment Knob
1 PC
ASSEMBLY
HARDWARE:
(33) Flat Washer
3PCS
11
TOOL
5mm Allen Wrench with
Phillips Screwdriver
(58) Hexagon
Socket Bolt
3PCS