Table of Contents
Advertisement
ASSEMBLY
TOOLS
13-15mm Wrench
1 PC
STEP 5
5A. Installing the Handlebars: Attach the Handlebar (4) onto the Rear Supporting Tube (15)
using two Curve Washers (30), two Spring Washers (102), and two Hexagon Socket Bolts
(101). Attach two Nylon Nuts (34) onto the protruding Carriage Bolts (101). Then tighten the
Nylon Nuts (34) with the 13-15mm Wrench provided.
5B. Connecting the Pulse Wires from the Handlebar: Connect the Hand Pulse Wire (98) from
the Handlebar (4) to the Connection Wire A (79) from the Seat Post (5) as shown in Figure E.
HARDWARE PACK
(101) Hexagon Socket Bolt
(30) Curve Washer
(34)
(102) Spring Washer
Nylon Nut
2PCS
2PCS
2 PCS
2 PCS
15
Hide quick links:
Advertisement
Table of Contents
