AMX HDMI-UTPRO-0808 Instruction Manual page 86

HDMI UTPro SEND_COMMANDs (continued)
?CO<O#>
Returns connection status for
the HDMI UTPro.
?FWVERSIOND<D#>
Returns the firmware version
of various HDMI UTPro
components.
InstaGate
INSTAGATECLEAR
commands
Clears persistence of the
Sink Key cache on the
HDMI UTPro.
INSTAGATEPERSIST
Stores (persists) the current
Sink Key cache on the HDMI
UTPro.
RESET
Performs a soft boot on the
HDMI UTPro.
Instruction Manual – HDMI-UTPRO-0808
Syntax:
SEND_COMMAND <DEV>,"'?CO<O#>'"
Variables:
• O# = output port number:
1-8 = Outputs 1-8 - a value of 0 or ALL means all outputs
Example 1:
SEND_COMMAND dvUTPro,"'?C'"
Returns which inputs are connected for all outputs.
Example 2:
SEND_COMMAND dvUTPro,"'?C1'"
Returns which input is connected to output 1.
Return string is of the form:
CO#-II#
Where O# is the queried output port number, and I# is the connected input number
(zero if disconnected), for example: C4-I2
Would show that output 4 was connected to input 2.
Syntax:
SEND_COMMAND <DEV>,"'?FWVERSIOND<D#>'"
Variables:
D# = hub component description
HUB
MAIN
The return value is "FWVERSION-<version>" - if the D and component description are
omitted then the command will return the version number of the HDMI UTPro.
Syntax:
SEND_COMMAND <DEV>,"'INSTAGATECLEAR'"
Example:
SEND_COMMAND dvUTPro,"'INSTAGATECLEAR'"
Clears persistence of Sink Key cache on HDMI UTPro.
Syntax:
SEND_COMMAND <DEV>,"'INSTAGATEPERSIST'"
Example:
SEND_COMMAND dvUTPro,"'INSTAGATEPERSIST'"
Stores the current Sink Key cache on HDMI UTPro.
Syntax:
SEND_COMMAND <DEV>,"'RESET'"
Example:
SEND_COMMAND dvUTPro,"'RESET'"
Reboots the HDMI UTPro.
HDMI UTPro NetLinx Programming
86