AMX HDMI-UTPRO-0808 Instruction Manual page 18

Compatible IR
equipment
Instruction Manual – HDMI-UTPRO-0808
Rear Panel Components (continued)
Serial Port (RJ-12)
NetLinx LED
Status LED
Ready LED
HDMI Matrix Switching Input
and Output Connectors
HDMI Transport Input
Connectors
UTP RJ-45 Transport Output
Connectors
Other AMX Equipment
Included Accessories
Compatible / Optional
Equipment
• Bi-directional RS-232
• Baud rates 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 (default 9600)
• RJ-12 connector
Blinks at 5 second intervals when a connection to a NetLinx Master is
established.
Non-functional.
Solid green indicates that NetLinx has fully booted and is ready.
The HDMI matrix switching connectors are located on the upper-half of the rear panel.
The HDMI input and output connectors allow for the use of cables from source and
destination devices with HDMI connectors.
These connectors also have local DDC (Display Data Channel) support with plug-and-
play information provided by the HDMI UTPro.
• HDMI inputs (IN 1-8) accept inputs from up to 8 HDMI source devices.
• HDMI outputs (OUT 1-8) connect to HDMI inputs (INPUT 1-8) on the bottom
(see HDMI Transport Input Connectors below).
Note: Refer to the "Digital Video - HDMI Specifications" table for complete specifications
(see page 19).
The HDMI inputs (INPUT 1-8) accept HDMI patch cables (provided) from the HDMI
matrix switching outputs (OUT 1-8).
The RJ-45 outputs (OUTPUT 1-8) provide connectivity for up to 8 HDMI-UTPRO-RX
Receivers (FG1403-20) via UTP cable.
• 8 HDMI-UTPRO-RX Receivers (FG1403-20); for specifications, see page 22
• 8 desktop power supplies (12 V 1.25 A) with power cord (FG1090-155)
• 8 connection cables (connect between HDMI matrix switching outputs and the HDMI
transport inputs)
• 1 power cord (standard US power cords are provided for installations within the US)
• 2 rack mounting brackets for the enclosure
Note: No A/V interface cables are supplied.
• UDM-RC05 IR Remote Control (FG1402-70)
• IR01 Infrared Emitter Module (FG-IR01)
• IR03 External Infrared Receiver Module (FG-IR03)
®
• MIO-R1 Mio Modero R-1 Remote Control (FG147)
• RS-232 Serial (DB-9/RJ-12) connection cable (FG-RS01)
• RS-232 Serial (DB-9/RJ-12) connection cable kit with adapters (FG-RS01K)
• 6 ft. (1.83 m) Ethernet crossover cable (CA2179-02)
• Surface Mounting Bracket kit - for Receivers (FG525)
Overview and General Specifications
18