AMX HDMI-UTPRO-0808 Instruction Manual page 70

FIG. 42
Zero-Config list showing network with HDMI-UTPRO-0808
Note: The serial number displays at the end of the product name in the Zero-Config tree.
Accessing the WebConsole
Caution: We strongly recommend that the WebConsole site be placed inside your network firewall and that
system security be turned on.
To access the WebConsole:
1.
From the NetLinx Studio Zero-Config tab
select one of the launch browser options.
The initial view is a display-only* view of the IP Settings page.
Or
In the Address Bar of your PC's browser
PC must be on the same subnet (e.g., 192.168.X.X).
The initial view is a display-only* view of the IP Settings page.
FIG. 43
IP Settings page
If the IP Setting page does not open, see the "WebConsole Troubleshooting" section on page 80.
* Note that the IP Settings page is display-only, because you have not yet logged in. You must log in before making
changes to the IP Settings page and to access the other pages described in this section. To log in, click the Login button
in the upper right-hand corner.
Instruction Manual – HDMI-UTPRO-0808
– Double-click on "AMX-HDMI-UTPRO-0808" or right-click and
– Type the IP Address of the target HDMI UTPro and press Enter. The
HDMI UTPro WebConsole
HDMI UTPro
IP address for HDMI UTPro
Zero-Config tab
70