AMX HDMI-UTPRO-0808 Instruction Manual page 122

5.
Click OK.
The Assign Signals to Matrices dialog box opens.
6.
From the Available Signals box, select the HDMI signal.
7.
From the Enclosure and Physical Matrix drop-down lists, accept the defaults.
8.
Click Assign Matrix.
9.
Click OK to finalize the settings and close the dialog box.
10.
From the Virtual Matrices view, right click the new virtual matrix and select Manage Connector Groupings.
The Manage Virtual Matrix Groupings dialog box opens.
11.
Under Select a Method, click Group by Pattern.
12.
Specify the following parameters for the input channels:




13.
Select the HDMI signal from the Available Signals list.
14.
Click Assign Signal.
Instruction Manual – HDMI-UTPRO-0808
Click OK
Under Pattern Type, select Sequential.
Under Channel Type, select Sources Only (Destinations Only will be selected in Step 17.)
From the Starting Channel drop-down list, select the first channel number "1" to be included.
[When you create VM 2: select "7" for the channel number.]
[When you create VM 3: select "8" for the channel number.]
From the Number of Channels to Create drop-down list, select the number of channels "6".
[When you create VM 2: select "1" for the number of channels.]
[When you create VM 3: select "1" for the number of channels.]
Select pattern Select Sources first time through (select Destinations second time)
Appendix D – Creating Virtual Matrices
Select signal
Check the settings
Select enclosure
Select the physical matrix
Click Assign Matrix
Specify starting channel
Specify number of channels
Select signal
Click Assign Signal
122