AMX HDMI-UTPRO-0808 Instruction Manual page 62


Four Examples of HDCP Source Sink Support (FIG. 35 through FIG. 38):
The next four figures illustrate system setups in which the source device supports a maximum of 3 sinks downstream of
the first repeater (R1) with varying numbers of repeaters and destinations.
Source Device
FIG. 35
Example #1 – Source device supports 3 sinks (three destination devices) downstream of R1
Source Device
FIG. 36
Example #2 – Source device supports 3 sinks (R2 and two destination devices) downstream of R1
Source Device
FIG. 37
Example #3 – Source device supports 3 sinks (R2, R3, and one destination device) downstream of R1
Instruction Manual – HDMI-UTPRO-0808
If a source could support 16 or more sinks downstream from the HDMI UTPro and a 17
downstream of the HDMI UTPro, the protected content stops transmitting and the HDMI matrix switching
input automatically clears its cache. The input will authenticate each of the downstream sinks again, but when
th
it reaches the 17 sink, the protected content stops transmitting and the cache is cleared. This process will
continue indefinitely until one of the HDMI UTPro's downstream sinks has been unplugged, bringing the
number back to 16 (the HDMI UTPro's sink limit).
HDMI-UTPRO-0808 (Repeater)
HDMI-UTPRO-0808 (Repeater)
HDMI-UTPRO-0808 (Repeater)
Repeater
HDMI-UTPRO-RX
HDMI-UTPRO-RX
HDMI-UTPRO-RX
Destination
Devices
HDMI-UTPRO-RX
Repeater
Destination Device
HDMI-UTPRO-RX
Repeater
Setting Up HDMI Systems
th
sink is added
Destination
Devices
62