Hdmi-Utpro-0808 Product Specifications - AMX HDMI-UTPRO-0808 Instruction Manual

HDMI-UTPRO-0808 Product Specifications

HDMI-UTPRO-0808 Specifications
Parameter
Approvals
Humidity
Operational Temperature
Storage Temperature
AC Power*
Power Consumption (max.)
Thermal Dissipation (max.)
MTBF
Dimensions
Depth
Width with mounting ears
Width without mounting ears
Height
Weight
Shipping Weight
Front Panel Components
Function Key
Control Dial
Select Key
LCD Display
Cancel Key
Take Key
Input/Output 1-8 Keys
Power LED
Rear Panel Components
Power Connector
Control Port (CPU)
Status LED (CPU)
ID Push Button
LAN 10/100 port (Ethernet)
* The fuse is internal and is not field serviceable. If you believe the fuse needs to be replaced, contact technical support
(see page 43).
Instruction Manual – HDMI-UTPRO-0808
UL, cUL, CE, FCC Class A, RoHS, WEEE
0 to 90% non-condensing
32° F to 113° F (0° C to 45° C)
-22° F to 158° F (-30° C to 70° C)
100 VAC to 240 VAC, single phase (50 Hz to 60 Hz)
110 Watts, fully loaded
375 BTU/hr, fully loaded
71,000 hours
Approximately 12 in. (30.5 cm)
18.9 in. (48.0 cm)
17.4 in. (44.2 cm)
3.5 in. (8.9 cm) (2 RU)
Approximately 13 lb. (5.9 kg)
46 lbs (20.87 kg) for complete system kit including 8 RXs (2 shipping boxes)
The Function Key accesses the Function menu on the LCD.
The Control Dial scrolls through menu options and adjusts values, such as global preset
numbers.
The Select Key enters a menu selection and can be used to execute presets.
The LCD displays the Function menu. The Function menu and its submenus access the
different modes and lists used to control the system.
The Cancel Key clears an incomplete operation and returns the display to the beginning
of a submenu or list.
The Take Key instructs the system to execute or disconnect a switch.
Input and Output Keys (1-8) correspond to the input and output connections on the rear
of the enclosure. These keys are used to select the input and outputs for routing source
signals to destination devices as well as for status and other operations such as locking
and unlocking the control panel.
The Power LED illuminates to indicate the unit is receiving power.
The universal power receptacle accepts all major international standard power sources.
Note: The rating along the sides of the power connector contains important installation
information.
Bi-directional RS-232
Baud rates of 9600, 19200, 38400, 57600 (default 9600)
DB-9 connector
System status indicator
Places the system in NetLinx Device ID assignment mode (requires NetLinx Studio).
Not required for installation.
Native NetLinx Device
TCP/IP (LAN 10/100)
Serves built-in WebConsole
Auto MDI/MDI-X cross-over
RJ-45 connector
Overview and General Specifications
Value
17