Confirming System Operation; Checking For Controller Errors - Omron NJ Series Startup Manual

3 Setting Up a Single-axis Servo System
3-7

Confirming System Operation

Confirm that the system is operating correctly.
Place the CPU Unit online with the Sysmac Studio before you perform the procedures that are given in
this section.
3-7-1

Checking for Controller Errors

The color of the ERR/ALM indicator in the Controller Status Pane of the Sysmac Studio shows the pres-
ence of any errors. If ERR/ALM is red, an error has occurred. Follow the instructions that are given
below to check the details of the error.
1
Click the
The Detailed View of the Controller Status Pane is displayed.
2
Use one of the following methods to open the Troubleshooting Window.
Method 1: Select Troubleshooting from the
Tools Menu.
Method 2: Click the
bar.
3-28
Button on the Toolbar of the Controller Status Pane.
Button on the Tool-
Indicates a Controller error.
NJ-series Startup Guide for Motion Control (W514)