Power Disconnect; Warning; Overview; Information In This Manual - Shure Microflex Complete MXC Series User Manual

Shure Incorporated

Power Disconnect

Apparatuses with or without On/Off switches have power supplied to the apparatus whenever the power cord is inserted into
the power source; however, the apparatus is operational only when the On/Off switch is in the On position. The power cord is
the main power disconnect for all apparatuses.

Warning:

Operation is subject to the following conditions: (1) The device may not cause harmful interference, and (2) the device must ac-
cept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
residential, commercial or light industrial environments. The equipment generates, uses, and can radiate radio frequency ener-
gy and if not installed and used in accordance with the user manual it may cause harmful interference to radio communica-
tions.
Operation of this equipment in residential areas is likely to cause harmful interference in which case the user will be required to
correct the interference at his or her own expense. Intentional or unintentional changes or modifications not expressly ap-
proved by the party responsible for compliance shall not be made. Any such changes or modifications could void the user's au-
thority to operate the equipment.
If necessary, the user should consult a dealer or an experienced radio/ television technician for corrective action. The user may
find the following booklet prepared by the Federal Communications Commission helpful: "How to identify and Resolve Radio-
TV Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock
No. 004-000-00345-4.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.

Overview

®
The Shure Microflex Complete (MXC) Digital Conference System is designed for meetings featuring multiple speakers and ac-
tive meeting participants. A single system supports MXC and legacy DCS conference units, dedicated interpretation consoles,
and integration with SW6000 meeting management software.
Microflex Complete complies with international conference standards, supporting advanced speaker control, simultaneous in-
terpretation, voting functionality, and conference management for up to 3,800 participants.

Information in This Manual

The CCU operates standard in "5900" mode for use in a DDS 5900 system. By uploading a feature license, the CCU can oper-
ate in "6000" mode for use in MXC and legacy DCS 6000 systems. This manual describes the CCU when operating in 6000
mode.
For information on operation with the DDS 5900 Discussion system, consult that manual found on the Shure website.

Features

When set to 6000 mode, the CCU has the following features:
• Controls a system of conference units, interpreter consoles, and channel selectors
6/75