NFC Card functionality
NFC card functionality is a feature where participants identify or log themselves into the system by use of an MXC NFC card.
In a standalone system, the card identifies the participant by name. Use the free Shure NFC Card Programmer application
(available on www.shure.com) and an authorized NFC card programmer device to encode this information on a supported NFC
card.
When used with SW6000, the NFC card contains the information Participant ID, Login Code and Location ID, which the Mi-
®
croflex Complete system uses to login and verify the participant using the SW6000 database. The functionality in general is
explained in the SW6000 CAA User Manual.
One card can contain information for both standalone mode systems and for use with SW6000.
Microflex Multipin Gooseneck Microphones
Lockable gooseneck microphones for use with MXC/MXCW conference units.
®
•
Commshield Technology eliminates RF noise
•
Lockable 10-pin connector
•
Built-in red/green/yellow LED indicator
•
Compatible with MX-series omni, supercardioid, and mini-shotgun cartridges
•
Available in 16 inch/40 cm or 20 inch/50 cm lengths, with optional Dualflex configuration
MXCMIU-FS | MXCMIU-FL Flush-Mounted Interface Plates
Shure Incorporated
18/75