Floor Mix On The Loudspeakers; Headphone Channels - Shure Microflex Complete MXC Series User Manual

Floor Mix on the Loudspeakers

Loudspeakers are included in most conference units for localized sound-reinforcement of the meeting. When a participant uses
their microphone, their speech is heard in the loudspeakers of the other units in the system. This improves speech clarity in
large rooms and reduces typical problems associated with sound reinforcement systems.
Note: To avoid feedback, the loudspeaker in a unit is turned off when the microphone is active.
Loudspeaker Adjustment
Loudspeaker volume is a system setting that applies to all connected units. Volume is adjustable from -0 dB (no attenuation) to
-40 dB, including off (mute). To adjust the volume:
From the Browser Inter-
face
From the CCU

Headphone Channels

Conference units include a headphone output for listening to interpreter channels or other participants on the floor channel.
Each participant chooses their channel from the conference unit channel selectors.
Channels 1 - 31 are dedicated for language interpretation. Participants select one of the channels to listen to their language
during a multilingual event. The audio source comes from interpreter stations transmitting onto their selected channel. See the
Interpretation section of this guide for more details.
Channel 0 (the floor channel) is typically selected by interpreters to provide simultaneous interpretation of those addressing the
floor, or by participants to listen to the floor channel on headphones.
1. Connect headphones to the headphone jack on the side of the conference unit.
2. Select a channel by pressing the channel selector button(s).
3. Adjust the volume of the headphones using the unit's volume controls.
Go to the Loudspeaker Control page (Audio > Loudspeaker Control) or the Microphone
control screen
Scroll to the Loudspeaker Menu (loudspk. control > loudspk. volume > db)
Shure Incorporated
39/75