1.
Connect the computer to the TCP/IP port on the CCU.
2.
Power on the equipment.
3.
Assign the computer to automatically obtain an IP address. This enables the computer to automatically connect to the
CCU.
Acquire an IP address by selecting LAN Setup > IP address mode > Dynamic.
4.
View the IP address: LAN Setup > IP address.
5.
6.
Open the web browser on the computer.
7.
Type
http://IP-address
8.
The browser interface opens the Admin screen.
Assigning the Network Address
Access to the web interface is available from two network addresses: IP address and hostname. Typing either address into a
browser will access the interface of the connected CCU.
Manage the network address from the web browser: System > LAN Setup
Additional Screens
In addition to Admin access to the web interface, there are two separate screens useful during the meeting:
•
Microphone control screen for speaker management, used by Chairman or moderator.
•
Display screens to view the speaker and reply/request lists, used on a large screen for reference by participants or audi-
ence.
Connect to the CCU
, where "IP address" is the address noted from the CCU.
Shure Incorporated
27/75