Rackmounting The Ccu; Installing The Conference Units - Shure Microflex Complete MXC Series User Manual

Rackmounting the CCU

Install the central control unit in a standard 19" rack using the supplied 19" brackets. Remove the screws holding the top and
bottom covers, then attach the brackets to the front of the unit using the same screws.
Important: Use the two 10 mm length self-threading screws closest to the front and the 8 mm length threaded screw furthest
from the front.
The built-in fan draws air in on the left side and exhausts air on the right, and so does not require extra space above or below
for cooling.

Installing the Conference Units

To accommodate numerous variables in each installation, the MXC series provides several models of conference unit in both
tabletop and flush configurations.
Both models include the same features, but are useful for different environments and applications.
Tabletop (Portable)
Installation options
• No modification required to table surface
• Easily add or remove units
• Can be fixed to tabletop using size 4 screws
Shure Incorporated
53/75