Mxc Conference Units; Conference Unit Hardware Descriptions - Shure Microflex Complete MXC Series User Manual

MXC Conference Units

MXC conference units facilitate communication between participants in group meetings and conferences. The units enable par-
ticipants to speak and be heard with clarity, even in large and multilingual events, by combining a gooseneck microphone, loud-
speaker, headphone jack, and user controls. For advanced meeting tasks, some conference units include features for voting,
following along to the agenda, managing speakers, and more.
Note: Speaker and meeting management settings are highly configurable and can be tailored to meet your event requirements. See meeting setup for more
information.

Conference Unit Hardware Descriptions

Not all features available on all MXC conference units.
①
Function Button (left button)
②
Speak Button (right button)
③
Headphone Output
④
NFC Card Reader Slot
⑤
Volume Control
⑥
Channel Selector
⑦
Channel Indicator
⑧
Microphone Input
⑨
DCS-LAN Network Connection
⑩
Loudspeaker
⑪
Voting Buttons
⑫
Front-Plate Connectors
⑬
XLR Input
Used for a variety of functions relating to speaking and par-
ticipant management. By default, this button mutes the
participant's microphone.
The speak button is used to control a participant's micro-
phone and a variety of functions relating to speaking and
participant management.
3.5mm jack, used for assisted listening of floor/loudspeaker
audio, as well as interpreter audio.
Enables participants to login and verify using a Shure NFC
card.
Increases and decreases audio playback volume.
Selects the audio channel for the headphone output.
OLED display to indicate the selected interpretation chan-
nel.
Lockable connector, compatible with Shure Microflex goose-
neck microphones.
RJ-45 in/out ports provide power, audio, and control infor-
mation on the same cable.
Provides individual, localized audio signal of the floor mix.
Configurable for 2-, 3-, and 5-button voting sessions.
Connection (Port A and Port B) for flush-mounted interface
plates. The cable carries audio and data information to and
from the front plate.
Mic/Line audio input. Select between Port A and XLR-Mic /
XLR-Line in the device setup menu. XLR input is disabled in
dual mode.
Shure Incorporated
13/75