Table of Contents
Advertisement
Microphone Status
Device power-up
Note: If LEDs are disabled, they will still turn on when the device powers up or when an error state occurs.
2.
Reset button
3.
RJ-45 network port
4.
Network status LED (green)
◦
Off = No network link
◦
On = Network link established
◦
Flashing = Network link active
5.
Network speed LED (amber)
◦
Off = 10/100 Mbps
◦
On = 1 Gbps
6.
Eyelet screws for suspension mounting (12 mm diameter)
7.
VESA MIS-D mounting holes (100 mm spacing)
8.
Safety tether attachment points
9.
Loudspeaker enclosure
Power Over Ethernet Plus (PoE+)
This device requires PoE Plus (PoE+) to operate. It is compatible with Class 4 PoE+ sources.
PoE+ is delivered in one of the following ways:
•
A network switch that provides PoE+
•
A PoE+ injector device (must be a gigabit device)
Note: When connected to a PoE source, the MXA902 works as a microphone but not as a loudspeaker. The red error LED also flashes. To dismiss, connect to
a PoE+ source to turn on the loudspeaker or go to Settings > Lights to clear the error.
Model Variations
SKU
MXA902W-S
MXA902W-S-60CM
Optional Accessories and Replacement Parts
•
A900-S-GM Gripple Mount Kit, Square
•
A900-S-PM Pole Mount Kit, Square
•
A900-PM-3/8IN Threaded Rod Adapter Mounting Kit
•
A910-JB Junction Box Accessory
•
A900-CM Ceiling Mount
•
RPM904 frame and grille assembly
•
RPM901W-US frame and grille assembly
LED Color/Behavior
Multi-color flash, then blue (moves quickly back and forth
across bar)
Description
White square microphone with loudspeaker
White square microphone with loudspeaker (60 cm)
Shure Incorporated
9/38
Hide quick links:
Advertisement
Table of Contents
