Tew-841Apbo #2 Configuration - TRENDnet TEW-841APBO User Manual

5 dbi wireless ac1300 outdoor poe+ omni-directional access point

Table of Contents

TRENDnet User's Guide

TEW-841APBO #2 Configuration

When configuring TEW-841APBO #2, repeat all steps in

the following:

11. In Step 11, under IPv4 Settings, select Static IP and enter the IP address

192.168.10.51, Subnet Mask 255.255.255.0, Gateway 192.168.10.1, and Primary

DNS 192.168.10.1 then click Save at the bottom of the page to temporarily save

your settings.

18. In Step 18, under the MAC Address section, click the Mode drop-down list and

select Enable. In the fields provided, enter the 5GHz WiFi MAC address of TEW-

841APBO #1 and click Save at the bottom of the page.

TEW-841APBO #1

aside from

MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE

1. The page should now have two indicators regarding pending changes:



Top right menu of the page:



Bottom right of the page:

Note: Settings configured on the Access Point are not applied until you click apply

changes. In order to minimize time spent waiting for the Access Point to reboot when

applying settings, we recommend configuring all necessary settings and changes prior to

apply & reboot of the device.

TEW-841APBO

APPLIED

Table of Contents