TRENDnet TEW-841APBO User Manual page 35

TRENDnet User's Guide
2.4GHz | 5GHz
Note: The following section will have different options bases on chosen Operation Mode
of the access point.

Operation Mode – Select the desired operation mode for each radio from the
drop down, Access Point, Client Bridge, WDS Access Point, WDS Station, or
WDS Bridge. For more information, see

Wireless Mode – Displays the IEEE standard per radio.

Channel HT Mode – Select the desired channel HT mode per radio from the
dropdown; 80MHz(AC Only), 40MHz, or 20MHz.

Channel – Click Configuration, and select the channel from the pop-up
window. GREY options are selected, and BLUE options are not selected. Click
Save to save the channel and close the pop-up. The following image is an
example of 5GHz channel selection window. **if the pop-up window does not
appear, please disable the browser's ad/pop-up blocker**
© Copyright 2019 TRENDnet. All Rights Reserved.
"Application Mode" on page 24.

Transmit Power – Select the desired transmit power from the dropdown.

Bit Rate – Click Configuration, and select the bitrate using the slider in the pop-
up window. Click Save to save the setting and close the pop-up **if the pop-up
window does not appear, please disable the browser's ad/pop-up blocker**

Client Limits – Enter the desired number of maximum clients and select
Enable/Disable

Multicast to Unicast Stream Conversion – Select Enable to enable this feature,
and Disable to disable the feature.
o
Unicast conversion method allows a WLAN AP to have a direct
relationship with each client to transmit original multicast-like traffics
on a one-to-one basis, establishing individual sessions between the
transmission server and each client. This method will add additional
bandwidth overhead on the unicast server upon each additional client.
o
Multicast transmission is a one-to-many group communication
methodology in which a WLAN AP forwards all broadcast traffics from
a multicast source to a client subnet where multiple client devices are
listening.

AP Detection – Click Scan to commence a network site survey of the
surrounding access points.

Distance – Enter in the distance (0-30 in km), as in the coverage radius. The
equivalent distance measured in miles is to the right of the field for your
convenience.
TEW-841APBO
32