TRENDnet TEW-841APBO User Manual page 18

TRENDnet User's Guide
8. Change the default administrator password by first entering the default password
(admin), then typing in the new password in the fields provided and then click the
Apply button at the bottom of the page.
Note: Clicking the green "refresh" button will display hidden characters typed
in the field.
IMPORTANT NOTE: This device does not have a hardware
reset button. When changing the administrator password to
the access point configuration page, please make sure to write
down your new password.
9. Upon clicking apply, you will return to the login screen. Please enter the newly
configured credentials to log back in.
© Copyright 2019 TRENDnet. All Rights Reserved.
10. Click on the Basic tab under Network category in the left hand menu.
11. Under the IPv4 Settings section, select Static IP and enter the IP Address
192.168.10.50, Subnet Mask 255.255.255.0, Gateway 192.168.10.1, and Primary
DNS 192.168.10.1 then click Save at the bottom of the page to temporarily save
your settings.
Note: Settings configured on the Access Point are not applied until you click apply
changes. In order to minimize time spent waiting for the Access Point to reboot when
applying settings, we recommend configuring all necessary settings and changes prior to
apply & reboot of the device. You may choose to configure and save first, then apply
everything together at the end.
TEW-841APBO
15