TRENDnet User's Guide
Hardware and Mounting Installation
Waterproof Kit Installation
1. Unscrew the sealing nut from the main body and remove the placeholder center
pin.
2. Separate the rubber seal from the claw.
3. Verify that you have the following parts:
4. Insert one end of an Ethernet cable into the sealing nut.
5. Insert the Ethernet cable into the seal.
© Copyright 2019 TRENDnet. All Rights Reserved.
6. Insert the seal into the claw.
7. Insert the seal+rubber claw into the Cable Gland.
8. Connect the Ethernet cable to the LAN (PoE) port on the bottom of the access
point.
TEW-841APBO
21