Table of Contents
Advertisement
TRENDnet User's Guide
8. Change the default administrator password by first entering the default password
(admin), then typing in the new password in the fields provided and then click the
Apply button at the bottom of the page.
Note: Clicking the green "refresh" button will display hidden characters typed
in the field.
IMPORTANT NOTE: This device does not have a hardware
reset button. When changing the administrator password to
the access point configuration page, please make sure to write
down your new password.
9. Upon clicking apply, you will return to the login screen. Please enter the newly
configured credentials to log back in.
© Copyright 2019 TRENDnet. All Rights Reserved.
10. Click on the Basic tab under Network category in the left hand menu.
11. Under the IPv4 Settings section, select Static IP and enter your chosen IP Address,
Subnet Mask, and Gateway, then click Save at the bottom of the page.
TEW-841APBO
10
Advertisement
Table of Contents
