TRENDnet User's Guide
3. Confirm the device is powered on through the LED indicators.
4. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.10) and subnet mask of 255.255.255.0.
Note: For information on how to statically assign your IP address, see the Appendix
section.
5. Open your web browser and type in the default IP address of the access point in the
address bar, then press Enter. The default IP address of the access point is
192.168.10.100.
© Copyright 2019 TRENDnet. All Rights Reserved.
6. When prompted, login to the access point management page using the default user
name and password settings.
User Name: admin
Password: admin
7. To change the administrator password, click on the Account tab under System
Manager Category at the bottom of the left menu.
IMPORTANT NOTE: This device does not have a hardware
reset button. When changing the administrator password to
the access point configuration page, please make sure to write
down your new password.
TEW-841APBO
9