TRENDnet TEW-841APBO User Manual page 20

TRENDnet User's Guide
16. To change the wireless network name/SSID, scroll down on the previous page
(Wireless tab under the Networking category) and identify the Wireless Settings –
Access Point section, and enter the name for the 2.4GHz WiFi in the SSID field. To
change the wireless encryption key, click Edit. A pop-up window will appear.

Under the Wireless Security section, enter the encryption key in the
Passphrase field. Click Save at the bottom of the page to temporarily save
the settings.
Note: By default, the wireless network name/SSID and wireless encryption has been
preconfigured for your convenience and can be located on the included wireless
sticker. If you are modifying the wireless settings, you will need to connect reconnect
all clients to the access point using the new credentials.
17. Scroll down on the previous page (Wireless tab under the Networking category)
and identify the WDS Link Settings – 5GHz section, click on the Security drop-down
list and select AES. Enter your chosen WDS encryption key in the AES Passphrase
field (8-63 alphanumeric characters).
Note: When configuring TEW-841APBO #2, the WDS AES Passphrase must be the same
as TEW-841APBO #1.
© Copyright 2019 TRENDnet. All Rights Reserved.
18. Just below, under the MAC Address section, click the Mode drop-down list and
select Enable. In the fields provided, enter the 5GHz MAC address off TEW-
841APBO #2 and click Save at the bottom of the page to temporarily save your
settings.
MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE
19. The page should now have two indicators regarding pending changes:

Top right menu of the page:

Bottom right of the page:
Note: Settings configured on the Access Point are not applied until you click apply
changes. In order to minimize time spent waiting for the Access Point to reboot when
applying settings, we recommend configuring all necessary settings and changes prior to
apply & reboot of the device.
TEW-841APBO
APPLIED
17