Tools - TRENDnet TEW-841APBO User Manual

TRENDnet User's Guide

Tools

Management > Tools
This page contains a selection of useful tools.
1. Log into your access point management page (see
management page" on page 27).
2. Click on Tools under Management from the left side menu.
Ping

Target IP / Domain Name – Enter the IP address or domain name of the ping
target.

Ping Packet Size – Specify the ping packet size. Standard ping size is 32 Bytes.

Number of Pings – Specify the number of pings. Standard ping test is 4 pings.

Press Start to begin the test.
Traceroute

Target IP / Domain Name – Enter the IP address or domain name of the
traceroute target.

Press Start to begin the test.
© Copyright 2019 TRENDnet. All Rights Reserved.
"Access your access point
Nslookup

Target IP / Domain Name – Enter the IP address or domain name of the name
resolution test target.

Press Start to begin the test.
Speed Test Parameters

Target IP / Domain Name – Enter the IP address or domain name of the
endpoint of the speed test.

Time Period – Specify the duration of the speed test.

Check Interval – Specify the interval between connectivity checks.

IPv4 Port – Enter the IPv4 Port for the destination endpoint of the speed test.

IPv6 Port – Enter the IPv6 Port for the destination endpoint of the speed test.

Press Start to begin the test.
TEW-841APBO
40