TRENDnet TEW-841APBO User Manual page 14

5 dbi wireless ac1300 outdoor poe+ omni-directional access point

Table of Contents

TRENDnet User's Guide

MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE

12. The page should now have two indicators regarding pending changes:

1. Top right menu of the page:

2. Bottom right of the page:

Note: Settings configured on the Access Point are not applied until you click apply

changes. In order to minimize time spent waiting for the Access Point to reboot when

applying settings, we recommend configuring all necessary settings and changes prior to

apply & reboot of the device.

13. To configure your wireless network name/SSID and wireless encryption settings,

click Wireless under Network in the left hand menu.

Note: By default, the wireless network name/SSID and wireless encryption has been

preconfigured for your convenience and can be located on the included wireless

sticker. If you are modifying the wireless settings, you will need to connect reconnect

all clients to the access point using the new credentials.

APPLIED

14. To change the wireless network name/SSID, under the wireless settings – Access

Point section, select which band you would like to configure, and enter the name in

the SSID field. Click Save at the bottom of the page to temporarily save the settings.

15. To change the wireless encryption key for the selected wireless band click Edit. A

pop-up window will appear. **You may need to disable your browser's pop-up

blocker.

16. Under the Wireless Security section, enter the encryption key in the Passphrase

field. Click Save at the bottom of the page to temporarily save the settings.