Menu Settings - Gazer F715 User Manual

Recording
quality
ENG
Loop recording
Date/Time
Auto-off time
Record audio
G-Sensor
sensitivity
Parking
vibration
Car battery
protect
Image rotation
TV Mode
Light frequency
Language
Format
Default setting
Version
16

Menu settings

1080P (1920x1080), 720P (1280x720)
Specifies the resolution of recorded video clips.
1 minute, 3 minutes, 5 minutes
Configures recording duration of a single video clip.
YY:MM:DD, HH:MM:SS
Date and time setting.
Before you start using the dash cam, we recommend that
you set the exact date and time and regularly check the
correctness of these settings. Date format used: YY:MM:DD.
Time format used:24 hours (Hour:Minute:Second).
Off, 1 Minute, 1 Hour, 6 Hours, 12 Hours, 1 Day, 2
Days
Automatic dash cam shutdown after a certain period
following ACC power off.
Set the required dash cam operation time after ACC power
is off.
On, Off
Enables/disables sound recording.
Microphone status setting.
Disable, Low, Normal, High
3-axis G-sensor sensitivity setting.
Files recorded when G-sensor is tripped (sudden
acceleration, braking, and collision) are automatically
protected from deletion during loop recording.
Off, 2X (0.5g), 5X (0.2g), 10X (0.1g)
3-axis G-sensor sensitivity setting after ACC power is off.
Increasing the value increases the sensor sensitivity,
whereas decreasing the value decreases the sensitivity. Files
recorded when G-sensor is tripped (sudden acceleration,
braking, and collision) are automatically protected from
deletion during loop recording.
Off, 11.7 V
Minimal voltage of the car's electrical system. When reached,
the dash cam shuts down automatically.
On, Off
180° image rotation.
NTSC, PAL
Video signal type selection.
50 Hz, 60 Hz
Light frequency value setting.
Selecting the menu language.
Cancel, OK
Memory card formatting.
Cancel, OK
System reboot with all settings reverted to their factory
values.
Current firmware version.