Settings Menu - Gazer F225 User Manual

To access the MVR settings menu, you first need to stop the recording
by pressing the REC/OK button (the recording stops with some delay
because the device needs to close and save the file with the last video
clip) and then press the MENU button.
Warning!
In the settings menu, options «GPS POWER», «Stamp
speed» and «Edog beep» are available when you connect an optional
GPS module.
Resolution
Quality
WDR
Stamp
LDWS+FCWS
LDWS+FCWS
calibration
Sec stream

Settings menu

Video Settings
Front camera recording settings.
1920x1080 30P 16:9
1280x720 30P 16:9
Recording quality settings.
S.FINE
FINE
NORMAL
Enable/disable WDR (wide dynamic range)
function.
Enable/disable video watermarking.
Enable/disable intelligent LDWS (Lane
Departure Warning System) and FCWS
(Forward Collision Warning System)
systems.
Calibration of intelligent LDWS and FCWS
systems. To calibrate the systems, align
the violet line on the display with the
horizon using Down and Up buttons. Press
the MODE button to start adjusting the
next line.
Align the red line on the car hood edge
with the road using Up and Down buttons.
Back camera recording settings.
1920x1080 30P 16:9
1280x720 30P 16:9
ENG
17