Troubleshooting > Contactless Card Reading - Infinite Peripherals LINEA PRO 6 User Manual

Troubleshooting > Contactless Card Reading
If the Linea Pro 6 is not reading RFID Tags/Cards properly refer to the table below for possible causes:
Problem
RFID does not power on
No RFID data being returned
during reading
Partial RFID data returned
during reading
Unable to read some RFID Tags/
Cards
If you continue having problems with your Linea Pro 6 which are not resolved by referencing the table
above, contact technical support at
Linea Pro 6 User Manual
UM-00003 Version: A
• Linea Pro 6 battery is too low
• Linea Pro 6 is not powered on by the software
• Faulty RFID reader
• Unreadable RFID tag/card
• Linea Pro 6 battery is too low
• Faulty RFID reader
• Software decoding incorrectly
• Unreadable RFID tag/card
• Linea Pro 6 battery is too low
• Faulty RFID reader
• Software decoding incorrectly
• RFID type is not compatible
• RFID type is not supported
See Technical Data section for additional information.
support@ipcprint.com.
Possible Cause
Page 26 of 31