Weight – 390 grams including battery and paper roll Thermal paper Roll 57.5 ± 0.5 mm wide 40 mm Ø (~ 80 feet) Thickness 0.06 ~ 0.10 mm Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Specifications B – 9 x 16 D –...
SDK are distributed online and is available for download at our website indicated below. For details on using the PP55 BlackBerry Drivers & SDK, please refer to the SDK’s documentation. For the latest PP-55 SDK’s, visit our developer web site at: http://www.ipcprint.com/support/default.asp...
The IPC PP-55 allows you to print information from your BlackBerry Smartphone. Before using the printer the battery should be properly charged and thermal media installed. The following Quick Start guide will help to get your PP55 ready for use. Quick Start:...
5000 inches of (alpha numeric) data. Prolonged periods of storage can cause a drop in the power of the printer’s rechargeable battery! Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Battery cover Device carrier Battery...
The PP-55 has a built-in charging circuit to enable the charging of (selected models) of BlackBerry device while in the PP-55’s cradle. PDA charging only occurs when the external AC/DC adaptor is connected to PP-55 adapter inlet. Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02...
Push and Hold - release after the number of beeps Note: Care must be taken when entering operating modes to prevent the clearing of factory preset configuration information. Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Charging LED Printer Status...
Press with both fingers to click cover of shell in place. Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Place the paper roll and cover in position.
RIM 7230, 7250, 7280, 7290 RIM 7510, 7520 RIM 7730, 7780 Devices are added continually. Visit our web site at : http://www.ipcprint.com/products/mobility/complist_thermpp55-50.asp Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Operation System (OS) Table 6 ......
PP-55 cradle connector and PDA connector are not accidentally damaged. The figures below show how to attach the different device to the PP55 printer and how to remove the device from the printer.
To use the magnetic card reader feature, special software must be used to read and process the information. Please consult your reseller if this software is available or contact Infinite Peripherals for recommendations on compatible third party software solutions. Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02...
The effective reading distance of the PP-55 barcode reader is approximately 10 cm. To scan a barcode, position the read head as close to the barcode label as possible. Activate the scanner then slowly pull back the unit increasing the distance between the barcode and read head until the barcode has been read by the scanner.
To sync your BlackBerry to the PC, using the USB sync cable that is supplied with the PP5 connect one end of the cable to the PP55 and the other to any standard USB port as shown in the figure below.
Replacing PP55 Battery To replace the battery in the PP55 printer follow the steps below. Hard Cradled version: 1. Remove the device from the cradle. 2. Using a Philips screw driver remove the (2) cradle screws at point (A). Note: do not detach the flex cable that connects the cradle to the base unit.
The PP55 thermal printer lets you add a stored logo to the Top or Bottom of your printed receipts. Note: In order to use a logo on printed receipts, the logo must first be loaded into the PP55 flash memory. Logo Manager (PC Utility): For help with creating and testing logos for the PP55, use Logo Manager.
The table below shows the SDKs currently available for BlackBerry devices. SDKs Language BlackBerry Java Java For details on using the PP55 BlackBerry SDK, please refer to the SDK’s documentation. For the latest PP-55 SDK’s, visit our developer web site at: http://www.ipcprint.com/support/default.asp Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02...
On-line LED always solid RED Printer stops responding to print and paper feed commands. Printing is light or missing only on half of the print width. Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Possible Cause Thermal media is specially coated on outside of roll.
Contact Information National Sales Headquarters: Midwest Sales Office: East Coast Sales Office Technical Support: Infinite Peripherals, Inc. www.ipcprint.com PP-55 User’s Manual for BlackBerry v4.02 Infinite Peripherals, Inc. 1340 Reynolds Avenue Suite 101 Irvine, CA 92614 Toll Free: 866-278-7860 Phone: 949-222-0300...
Need help?
Do you have a question about the PP55 and is the answer not in the manual?
Questions and answers