Contactless Card Reader (Rfid) - Infinite Peripherals LINEA PRO 6 User Manual

Contactless Card Reader (RFID)

The Linea Pro 6 has a built-in RFID tag/card reader. The RFID reader incorporates several RFID format
depending on the model of your Linea Pro 6.
To Use the RFID Reader:
1. Activate the Linea Pro 6 by pressing the Scan button.
2. Place the RFID tag/card over the receiver/transmitter as indicated by the RFID label. The data will
be sent from the Linea Pro 6 Tab contactless reader to the iOS Device.
Note:
Keep the face of the tag/card flat, with the receiver/transmitter as close as possible. Depending on the
type of RFID tags/cards being used, it may be necessary for tags/cards to make direct contact with the
surface where the RFID receiver/transmitter is located for proper reading and writing.
Linea Pro 6 User Manual
UM-00003 Version: A
Figure 12: RFID Reader
Page 20 of 31