McLaren P1 Owner's Handbook Manual page 117

INSTRUMENTS
LEFT-HAND SIDE OF DISPLAY
To change from raise to lower, move the
menu control stalk downwards. The vehicle
will start to lower, and the information
displayed on the instrument cluster will
confirm the change.
When the vehicle is fully raised, an audible
confirmation tone is heard. 'Ride Height:
Raised' appears on the instrument screen and
the vehicle lift icon is illuminated while the
vehicle remains raised.
If there is no further activity, the Vehicle raise
text display will exit after the timeout duration
has been exceeded. To set the timeout to
home screen duration, see Home Screen,
page 3.9.
Vehicle Lift - Lower
NOTE: To lower the vehicle while
stationary, the engine must be running
or the vehicle must be in E-Mode and
both doors must be fully closed.
NOTE: When the vehicle is raised, you will
only have the option to lower the
vehicle.
NOTE: Do not drive at high speed whilst
the vehicle is lowering. If the vehicle
begins to auto lower, a descending
audible tone is heard, and the vehicle lift
menu will be displayed in the left-hand
display allowing you control of the
system.
NOTE: Always check the vehicle lift icon
in the right-hand display before driving
your vehicle.
NOTE: Vehicle lift is not available when in
Race mode.
To lower the vehicle, select the vehicle lift
menu (see Accessing the Menu, page 3.21)
and then move the menu control stalk
downwards.
The change in vehicle ride height is
confirmed by a descending audible tone.
'Vehicle Lowering' appears in the instrument
display and the screen vehicle lift icon will
flash.
3.23