Removing The Ozone Filter - Canon LBP-CX Series Service Manual

This radius should be more
than 15mm.
r cable
(6) Take out the fan cover (3).
(7) Unplug the connector located at the left side of
the printer. Remove the two fastening screws and
take out the fan.
Figure 4-20
b; Removing the ozone filter
( 1) Open the printer (raise the upper half). Open the
right door. Take the EP cartridge out.
(2) Remove the fastening screw, hold the ozone
filter slightly up and pull out the ozone .filter.
Figure 4-21
COPYRIGHT
©
BY CANON INC. CANON LBP·CX SERIES REV.2 JULY 1985 PRINTED IN JAPAll (IMPRIME AU JAPONJ
4-5