T-1. Manual Feed Unit; Cassette Pickup Assembly - Canon LBP-CX Series Service Manual

Table of Contents

Advertisement

I
T-1.1
Manual feed unit
Cause
Step
Check
Result
Measure
Print paper
l
Is manufacturer-approved paper
YES
Advise the customer to use manu-
being used?
facturer-approved paper.
2
Is paper wrinkled or curled?
YES
Replace the paper.
Inform the customer of the correct
method of storing paper.
Paper detection
3
Does the arm move smoothly?
NO
Adjust the arm motion.
arm 1
Lower roller
4
Is there deformation due to wear?
YES
Replace the roller if worn.
Is the roller dirty?
Clean with alcohol.
Guides
5
Are guides deformed?
YES
Replace deformed guides.
I
T-2.
I
Cassette pickup assembly
Cause
Step
Check
Result
Measure
Cassette loading
1
Is the internal cassette loaded with
YES
Advise the customer to remove the
capacity, print
more than 1 Omm of paper?
excess paper.
paper
2
Is manufacturer-approved paper
NO
Advise the customer to use manu-
being used?
facturer-approved paper.
3
Is paper wrinkled or curled?
YES
Replace the paper.
Is damp paper being used?
Show the customer how to store
paper.
Cassette position
4
Is the cassette spring lifting force
NO
Show the customer how to insert
I
as specified? Refer to table 7-2
the cassette.
in this chapter.
Cassette springs
5
Is the cassette spring lifting force
NO
Check the movement of the cassette
as specified?
plate. If
OK,
replace the 2 springs.
Cassette hold-
6
Is the left or right cassette hold-
YES
Replace the hold-down tabs.
down tabs
down tab deformed?
Pickup rollers
7
Are any pickup rollers
YES
Replace the pickup rollers as
deformed or worn?
required.
Pickup control
8
Is the clutch spring deformed,
YES
Replace the clutch spring.
unit
rusty or worn?
J
T-3.
j
Separation/feeder unit
I
Cause
Step
Check
Result
Measure
Separation belt
l
Is the separation belt damaged
YES
Replace the belt.
or twisted?
2
Is the belt inside out?
YES
Reinstall correctly.
Separation/feeder
3
Is any roller dirty or worn?
YES
Clean dirty rollers.
unit
Replace the separation/feeder unit
if rollers are badly worn.
4
Do pinch rollers press firmly against
NO
Replace the pinch roller spring.
separation and feeder rollers?
Feeder rollers
5
Are the feeder rollers dirty or worn?
YES
Clean with alcohol if dirty and replace
if worn.
Transfer guides
6
Are the transfer guides deformed
YES
Replace the guides.
in any way?
COPYRIGHT
©
BY CANON INC. CANON LBP-CX SERIES REV.2 JULY 1985 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents