Canon LBP-CX Series Service Manual page 122

No
Procedure Checkpoint Remarks
13 Attach the rear panel. Lift the re-
lease grip, and raise the upper half of
the printer, and open the right door.
14
Remove the cartridge (in the sealed See Fig. 5-7.
aluminum bag) from the package.
Remove the aluminum bag. Hold the
cartridge horizontal and rock it 45°
slowly back and forth about five
times to distribute the toner evenly,
then install the cartridge into the
printer.
15
Peel the seal off the EP cartridge.
Close the front door, and lower the
upper half of the printer.
16 Install the print tray, manual feed
Install the manual
tray and cassette. tray on the printer
mounted vertically.
17 Clean the outside of the printer and
surrounding area.
Table 5-1
COPYRIGHT
©
BY CANON INC. CANON LBP-CX SERIES REV.2 JULY 1985 PRINTED IN JAPAN (IMPRIME AU JAPONJ
5-3