Separation/Feeder Unit; Feed Guide; Removing The Separation/Feeder Unit - Canon LBP-CX Series Service Manual

D. Separation/feeder Unit
Belt spring
Feeder pinch
roller
Pinch roller
Feeder
roller
Figure 4-43
Separation Separation ,
pinch roller belt
Removing the separation/feeder unit
(I) Open the printer and remove the EP cartridge
and the separation belt.
(2) Remove the harness cover. (See Fig. 4-11.)
(3) Remove the fixing assembly. (See Figs. 4-75
to 4t-77.)
(4) Remove the feed guide. (See Fig. 4-46.)
(5) Remove the two separation/feeder unit screws,
then remove the separation/feeder unit.
Figure4-44
Assembly is the reverse of disassembly. During
assembly, be careful not to bend or damage the
separation belt. See V.B.2. in Ch. 6. for instruc-
tions about separation belt installation.
Separation/feeder
side
Transfer
guide side
Figure 4-45 Assembled separation belt
E. feed Guide
1. Outline
The separation/feeder unit guides the paper to the
fixing assembly.
2. Removal
( 1) Open the printer and remove the EP cartridge.
(2) Remove the feed guide (4).
Screw!
Screw!
Note:
Be careful not to break the transfer corona guide wire.
Figure 4-46
COPYRIGHT
©
BY CAllOll INC. CJ\11011 LBP·CX SERIES REV.2 JULY 1985 PRINTED IN JAPAll (IMPRIME AU JAPOllJ
4-11