Pd1000A To-220 And To-247 Device Test Fixtures - Keysight Technologies PD1000A Operating Manual

PD1000A TO-220 and TO-247 Device Test Fixtures

PD1000A TO-220 and TO-247 Device Test Fixtures
TO-220 and TO-247 device packages are generally designed as through-hole
devices. Other package types, including the TO-257 (an hermetically sealed
metal package that is otherwise equivalent to the TO-220) and the TO-262
(I
Some device data sheets refer to a case style ITO-220. This refers to a TO-220 style case but with
Drain or Collector
Source or Emitter
Figure 5
Figure 6
Keysight PD1000A Test Fixture Operating Guide
2
PAK) package may also be tested with this fixture.
Some device data sheets refer to a case style ITO-220 which
refers to a TO-220 style case but with an isolated tab. The tab is
used only as a heat sink.
an isolated tab.
Gate
Female SMA
Gate
Connector to
PD1000A Bias T
Keysight PD1000A TO-247 and TO-220 Test Fixture
TO-220 Style Package
Typical TO-220 Device and TO-247 Device Packaging
Make certain the Test Fixture work station is ESD protected. See
"Static-safe Handling Procedures" on page 11 for details.
Typical MOSFET
Extra Source or
Emitter connection
(used for calibration)
Female SMA
Connector to
Drain/Collector
PD1000A Bias T
TO-247 Style Package
15